 Technical Editor, Writer, and Production |
| THIS POSITION HAS BEEN FILLED.
However, ICM is accepting resumes to keep on file for ... |
|
| Material Handler 3 |
| This person must perform a variety of Material Handler duties with little guidance. Provides ... |
|
| Simulator Technician I |
| SUMMARY
Applies basic knowledge and experience to solve routine technical tasks or system ... |
|
| ELECTRICAL ENGINEER |
| Exciting.... challenging.... bleeding edge ..... super work environment and co-workers ... low cost ... |
|
| Sr. Buyer |
| Sr. Buyer Description: A large, well known aerospace company is currently looking for an ... |
|
| Inspector |
| Experienced and versatile quality assurance Inspector. Inspector will be responsible ... |
|
| Space Systems Engineer/Systems Architect |
| Description:
The Johns Hopkins University Applied Physics Laboratory (APL), a national leader in ... |
|
| Program Manager (ROV / ETO Systems) |
| Join the Sub-Sea world of Schilling Robotics!
Schilling Robotics is the world's leading ... |
|
| Propulsion System Logistic Engineer |
| JOB DUTIES: performs technical tasks such as logistics support analysis, repair-level analysis, ... |
|
| Project Engineer - Aircraft Avionic and Electrical Systems Modifications |
| Project Engineer - Aircraft Avionic and Electrical Systems Modifications
Aircraft prime contractor ... |
|
|
Inspector
| Details |
Country: USA
Location: AZ Phoenix
Total applied: 33
Relevant Work Experience: 2+ to 5 Years
Career Level: Entry Level
Education Level: High School or equivalent
Job Type: Employee
Job Status: Full Time
Job Shift: Second Shift (Afternoon) |
|
Inspector
We are an established aerospace machine shop seeking a first piece and in-process inspector for the night shift, capable of running a manual CMM.
This shift is typically 49 hours per week:
M-Th 4:00 PM to 2:30 AM & Fri 3:00 PM to 12:30 AM.Benefits include shift premium, 401k, medical, and vacation.
The following are minimum requirements for this position:
3 years experience in an aerospace machine job shop, first piece inspection, in-process inspection, manual CMM, final inspection, inspection using standard hand tools; plate layout; basic shop math; blueprint reading; understand and apply basic GD&T; ability to complete detailed paperwork to company and customer requirements; good handwriting; experience with PC, MS Office software and jobshop software; own basic personal hand tools and gages.
Honeywell part experience is preferred, but not required.
If you do not meet the minimum requirements, please include a cover letter with additional information showing your potential for this position.
Please apply if the following appeals to you:
-we are a shop of around 50 people
-low volume, quick-turn supplier for machined parts
-primarily aerospace
-ISO9001 & AS9100 registered
-a quality shop, well-thought of by our customers
-a stable company, many employees here for over 10 years, some over 20
-lots of work, in a fast-paced environment
|
| Related jobs |
|
|
Program Manager
Ducommun AeroStructures a premier supplier to the worldwide aerospace industry, profitably growing by producing subassemblies, subsystems and proprietary products with a ...
|
|
|
Crew Exploration Vehicle Flight Software SE&I Engineer
L-3 Communications Titan Group Enterprise IT Support Division has an opening for a Senior Flight Software SE&I Engineer supporting avionics software architecture for ...
|
|
|
SR SOFTWARE ENGINEER
SENIOR SOFTWARE ENGINEER contract position available in Chandler, Arizona (AZ). Come work for an excellent technical company located in the East Valley!
***Only ...
|
|
|
Aircraft Engine Trader
Our client, INVENTORY NAVIGATION (INN), www.inventorynavigation.com wants to add an experienced, high energy engine trader to their staff in the Phoenix, Arizona ...
|
|
|
Embedded Software Engineer
GRADUATING ENGINEERS - Jump-start your career in a fast-paced environment with a company that encourages you to take on new responsibilities as fast as you can develop ...
|
|
|
Lead Technician
Description: ARINC in Phoenix, Arizona is looking for a Lead Aircraft Technician to join their team to perform airframe and power plant maintenance on A-4 Hawk and A...
|
|
|
US Airways Vacations Revenue Mgmt Sr. Analyst
Job Description: This position has the responsibility of pricing the various components of vacation packages and preparing all of the necessary analytical reports ...
|
|
|
Technical Manager
Job Description: CDI is seeking a Technical Manager to provide supervision and leadership to the Technical Leads. This candidate will be responsible for each applicable ...
|
|
|
Contracts Manager
Contracts Manager Description: The Contracts Manager is responsible for the administration/coordination and management of all commercial and government contracts, ...
|
|
|
ELECTRO/MECH/HYDRAULIC TECHNICIAN
Hydraulic Tech. Will perform work assignments as determined by shop management. Ensures all work is conducted in accordance with approved technical data, customer ...
|
|
| Related press releases |
Courageous reform
There can be little doubt we are making progress when it comes to improving further education. More young people and adults than ever are gaining good qualifications ever...
|
|
Half of MG Rover workers want to return
Almost a year after the collapse of MG Rover, many former workers are paid less and wish they still worked for the firm, according to a report released today.
Of the nea...
|
|
Making ends meet
Earning some dosh to get through uni might seem unavoidable, but don't lose sight of the reason you are there: to get a degree. Earning shouldn't mean missing vital lectu...
|
|
Young, successful, well paid: are they killing feminism?
Chiara Cargnel wants to have it all: a high-flying career and a successful marriage. So far she is halfway there. At 26, she is an investment banker in London working ove...
|
|
The earth man cometh
I am merely the conduit,' says Patrick Holden, director of the Soil Association, when I ask him to sum up his achievement after 10 years in the job. 'The great thinkers, ...
|
|
Battle at the coalface
In his television review Rupert Smith described the NUM miners leader Arthur Scargill as "a ghastly little man who needed to be trodden on" (G2, March 23). I suppose he w...
|
|
Hutton eases small firms' pension fears
The government will not force employers to contribute to workers' pensions without making efforts to minimise the impact on firms, the work and pensions secretary, John H...
|
|
NHS hospital redundancies gather pace
A wave of redundancies across the NHS in England gathered force yesterday when a London teaching hospital announced that nearly 500 posts will be axed in an attempt to di...
|
|
Union warning over 'raw' stalls handlers
The Transport and General Workers Union (T&G) yesterday launched a fierce attack on the overall standard of the stalls handlers likely to be working at British racecourse...
|
|
Minimum wage to rise to £5.35
The minimum wage will rise by 6% in October to £5.35, the government confirmed yesterday, but it cautioned that the days of big, inflation-beating rises may be over...
|
|
|
|
Aerospace & Aviation & Defense 
